How To Cut And hemming trousers and skirts

How To Cut And hemming trousers and skirts 

When you buy pants or skirts, are rarely exactly the desired length. You should then turn to a dressmaker. The price, in most cases, is equivalent to the cost of the same pants. With this guide, however, you'll learn to do everything alone.
Instructions DIFFICULTIES 1

   1. Once put on the head, possibly with the shoes, determine the desired length and with the help of someone, put at that height a couple of pins along the edge to avoid losing the measure. You can do this even on one leg. Pull off the head and fitted with the part to shorten cm; After that, apply the pins all along the rim.
   2. Cut the fabric below the line, leaving the other pins 5 cm, as this part will create the hem of the garment. Reports the same extent on the other leg the same height and size. Before doing so, prevents the cut fabric come off, it is necessary, therefore, that you give a point of finishing (zig zag) along the edge, preferably with a sewing machine. To prevent the fabric is wrinkled, just a point off.
   3. Now bend the pins inside the edge, leaving visible from the outside. The pins are used to block the edge now that you're going to stop with the basting. After tack, turn the head, because now you have to work backwards. With the wire of the closest color of the garment, thread the needle once and once on the brink before being careful not to "pinch" very fabric, otherwise risk to see the wire from the right side of the head.
      Addressed further from the straight and stretch thoroughly, paying attention to the crease.
Necessary

    * August
    * White wire from Basting
    * Thread that matches the color of the head
    * Pins
    * Scissors
    * Centimeters Sarta
    * Thimble (if necessary)
    * Sewing machine