How to light a fire
A fire seems like a trivial thing but not if you do not know how. The lighter or matches, we believe that is a breeze, but without adequate knowledge of the risk of being disappointed and especially cold! .. With this guide you will be able to light a fire wherever you can find the materials to do so, such as a forest.
Instructions
DIFFICULTIES 1
1.Find a lot 'of pieces of wood large, medium and small branches, more if you did not bring with you paper, look for things such as dry grass or other easily flammable pieces of cane (they burn a lot of smoke but very good) or similar materials. The choice of raw materials makes the difference, you will agree look very dry wood.
2.now is the most important part, building the fire. Do not put random things if you do not want to extinguish the fire within a few minutes. To make a good fire should keep in mind the rule of vertical integration, for which the heat tends to go upwards and not sideways. A good way to start is to put three large wood in this way: I - I
The two sides are flat on the floor in parallel, the minimum distance depends on the size of wood you choose, but must not be less than a dozen centimeters (I think the ideal is a foot and a half). The third timber is placed above and perpendicular to the other two so that it touches the ground.
3.A this point, you have to put under the central wood easily flammable materials in this order: the lower the dry grass or paper, above all those minutes that you are getting dry kindling. If you want to put some wood intermediate lay it at an angle to the central wood off the ground, with one end touching the ground and the other resting in the center of the central wood, thus maximizing the advantage of verticality. One thing about so / - to be clear, just to give you an idea.
4. you can turn on! Parties dry grass (or paper) at the bottom and slowly you'll ignite the wood minutes, so as to adjust the flame to medium intensity for several minutes. In this period of time to avoid the risk that the wood panel does not begin to take (I assure you that we put a lot of big wood to burn at the beginning) as the sticks minutes begin to run out of new aggiungine to ensure a flame continues for at least half an hour.
5.Prendi care of your fire until the wood does not take big, sometimes fan the flames to rekindle the flame, add dry wood of intermediate size before the finish in those placed initially in short, seeks to ensure a medium flame until they ignite or larger timber. From now on, everything is easy: just add wood medium and large as they consume, and forget preoccupation to keep alive the fire which is now well underway.
Tips and warnings: Remember to always put water sources near a fire as a bottle or better still at least a bucket. Accidents can happen, is stupid does not prevent them.
No comments:
Post a Comment